This triple output dc power supply provides the stable and reliable dc power that the R&D engineer or production department can use. It has two tracking 25V outputs, which are together referenced to a floating common, and an isolated 6 volt output. It is easy to control from the front panel, or with industry standard SCPI commands via the RS232, USB or optional GPIB. The low noise, excellent regulation make this reliable power supply well suited for your design and test requirements.
USB is not available on the Agilent E3631A and is the future of automated testing. GPIB is available as an option if desired. Compare the specifications very carefully to the Agilent E3631A and see the only difference is the standard USB and a much lower price. Volume discounts are available for large quantities.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Ripple & Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p
Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms
Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms
Readback Accuracy at 25°C ±5°C
Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV
Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA